Oil & Gas Fabrication

Field-ready fabrication support for oilfield infrastructure, production facilities, skids, structural systems, and long-term operational reliability.

Talk With Our Team

Oil and gas operations depend on fabricated systems that are built correctly, fit the field conditions, and support safe, reliable production. Production facilities, well pads, SWD sites, LACT units, pump systems, equipment skids, pipe supports, platforms, access structures, and field modifications all require fabrication that can stand up to harsh environments and real operating demands.

When fabrication is poorly coordinated, field teams lose time, installations get delayed, and operators end up solving problems that should have been handled before equipment reached the site.

DSI provides fabrication support backed by electrical construction, automation, panel shop, engineering, and field service capabilities. That means fabricated systems can be planned, built, installed, wired, controlled, and supported with fewer handoffs and better long-term accountability.

Full-Scope Fabrication Support for Oilfield Operations

One team. One build. One accountable partner.

Oilfield fabrication is rarely just a standalone shop project. Fabricated components have to fit the site, support the equipment, allow safe access, protect electrical and control systems, and make installation practical for the field team.

DSI brings fabrication, electrical construction, automation, panel shop, engineering, and field service together so operators can reduce vendor coordination and keep projects moving from concept through installation.

Whether the work involves a custom skid, structural support, equipment mount, access platform, panel support, field modification, or repeat-build oilfield component, DSI builds with the full system in mind.

The DSI Oilfield Fabrication Advantage

DSI’s fabrication work is strengthened by the rest of the DSI platform. Our team is not only thinking about the metalwork. We are thinking about how the fabricated system will be installed, powered, controlled, maintained, and supported in the field.

With DSI, oil and gas operators get:

Fabrication support for oilfield production environments
Coordination with electrical construction teams
Coordination with automation and control system teams
Support for panel mounting, equipment skids, and field-installed systems
Fabricated structures built for service access and maintainability
Practical shop-to-field execution
Support for custom builds and repeatable fabrication programs
Faster problem-solving because key disciplines work together
Field service insight built into fabrication planning
Long-term accountability from one integrated partner

The result is fabricated infrastructure that supports safer installation, better field execution, and long-term oilfield reliability.

Oil & Gas Fabrication Capabilities

Equipment Skids and Oilfield Support Structures

Oilfield equipment needs fabricated systems that are strong, practical, and ready for real field conditions. DSI supports fabrication for skids, equipment supports, mounting structures, and production-site infrastructure.

DSI supports fabrication for:

Equipment skids
Pump and motor support structures
Panel and enclosure support frames
Control system mounting structures
Production facility support systems
Equipment platforms
Structural bases and frames
Field-installed fabricated assemblies
Custom oilfield infrastructure components

DSI builds with installation, electrical access, maintenance needs, and long-term serviceability in mind.

Fabrication for oilfield production facilities and well pads

Fabrication for Production Facilities and Well Pads

Production facilities and well pads often require fabricated components that support process equipment, electrical infrastructure, instrumentation, access, and safe operation. DSI helps operators bridge the gap between shop fabrication and field execution.

DSI supports:

Well pad fabrication support
Production facility fabrication
Equipment mounting systems
Access structures
Pipe and conduit supports
Control panel supports
Instrumentation mounting supports
Field modification fabrication
Facility expansion support

Because DSI also supports electrical, automation, and field services, fabricated components can be coordinated with the systems they support.

Panel, Enclosure, and Controls Support Fabrication

Control panels, automation equipment, electrical enclosures, and field devices often need fabricated supports, mounts, frames, and protective structures. DSI’s fabrication team works with the panel shop, automation team, and electrical field crews to make sure these systems are practical to install and service.

DSI supports:

Control panel support frames
Enclosure mounting structures
Instrumentation mounting brackets
Operator station supports
SCADA and RTU equipment supports
VFD and MCC support structures
Protective guards and supports
Field device mounting solutions
Custom fabricated control infrastructure

This coordination helps prevent the common problem of fabricated supports being built without considering wiring, access, field installation, or future maintenance.

See Our Projects

Platforms, Access, and Maintainability Fabrication

Oilfield infrastructure has to be serviceable. Operators and technicians need safe, practical access to equipment, panels, controls, pumps, valves, and instrumentation. DSI supports fabrication that improves access, safety, and long-term maintainability.

DSI supports:

Access platforms
Stairs and ladders
Walkways
Equipment service platforms
Safety railings and guards
Maintenance access structures
Field modification support
Operator access improvements
Custom site-specific fabrication

Good fabrication does more than hold equipment in place. It helps people work safely and efficiently around critical oilfield systems.

Custom Fabrication and Field Modification Support

Oilfield sites often require practical problem-solving. Existing infrastructure may need to be modified, strengthened, adapted, or reworked to support new equipment, changing production needs, safety improvements, or modernization projects.

DSI supports:

Custom fabricated components
Field modification support
Retrofit fabrication
Replacement structures
Site-specific fabrication needs
Equipment adaptation
Installation support fabrication
Fabrication for modernization projects
Coordination with active field operations

DSI helps operators solve real-world field challenges with fabrication support that is practical, coordinated, and built for the job.

Repeat Builds and Standardized Oilfield Fabrication

Many oilfield operators benefit from standardized fabricated components that can be repeated across well pads, facilities, regions, or equipment programs. DSI can support both repeat-build fabrication and one-off custom work.

DSI supports:

Repeat-build fabricated components
Standardized skid programs
Multi-site oilfield fabrication programs
Consistent shop fabrication practices
Fabrication for repeat panel or control deployments
Field feedback improvements
Design refinement over multiple builds
Documentation and repeatability support
Long-term program support

Standardization can reduce installation time, simplify maintenance, and support more consistent infrastructure across oilfield assets.

Talk to Our Oil & Gas Fabrication Team

Built for Oilfield Installation and Long-Term Reliability

Fabrication that works in the field, not just in the shop.

Oilfield fabrication has to survive transportation, installation, weather, vibration, field use, and long-term maintenance demands. It also has to fit the electrical, automation, panel, and mechanical systems around it.

DSI builds fabrication support with the full operating environment in mind. Our integrated teams help ensure fabricated systems are practical to install, easier to maintain, and better aligned with the long-term needs of oil and gas operators.

What operators can expect:

Fabricated systems built for field conditions
Better coordination between shop and field teams
Practical access for maintenance and service
Support for electrical and automation integration
Reduced vendor handoffs
Improved installation readiness
Support for modernization and expansion projects
A partner that understands oilfield execution

Field-Proven Across Major Oil and Gas Regions

DSI fabricates for oilfield operators working the country’s most active basins, including the Permian Basin around Midland and Odessa and the Williston Basin and Bakken. Skids, racks, and supports are built in the shop and delivered ready to install in real production environments.

Frequently Asked Oil & Gas Fabrication Questions

What oil and gas fabrication services does DSI provide?

DSI provides fabrication support for oilfield infrastructure including equipment skids, support structures, control panel supports, access platforms, field modifications, equipment mounting systems, pipe and conduit supports, and custom fabricated components.

Does DSI fabricate equipment skids for oilfield operations?

Yes. DSI supports fabrication for equipment skids, pump and motor supports, control system skids, panel supports, and other field-ready oilfield assemblies.

Can DSI support fabrication for well pads and production facilities?

Yes. DSI supports fabrication needs for well pads, production facilities, SWD sites, LACT units, pump systems, and related oilfield infrastructure.

How does DSI’s fabrication team work with electrical and automation teams?

DSI’s fabrication team can coordinate with electrical construction, automation, panel shop, and field service teams so fabricated systems support wiring, controls, installation, startup, and long-term maintenance needs.

Can DSI build supports for panels, enclosures, and controls equipment?

Yes. DSI fabricates supports, frames, mounts, brackets, and structures for control panels, electrical enclosures, automation equipment, instrumentation, and field devices.

Does DSI support field modifications?

Yes. DSI can support field modification needs, retrofit fabrication, equipment adaptation, replacement structures, and site-specific fabrication for changing oilfield conditions.

Can DSI support repeat-build fabrication programs?

Yes. DSI can support repeat-build fabrication for standardized components, multi-site deployments, oilfield panel programs, skid programs, and repeatable infrastructure needs.

What makes DSI different from a typical fabrication shop?

DSI combines fabrication with electrical construction, automation, panel shop, engineering, and field service capabilities. That gives operators one coordinated partner for fabricated systems that need to be installed, powered, controlled, and maintained in the field.

Let us build oilfield fabrication that works in the field

Let’s Build Oilfield Fabrication That Works in the Field

Your operation depends on fabricated systems that support safe installation, reliable production, and long-term serviceability. DSI is ready to fabricate, coordinate, install, and support the infrastructure behind your oil and gas operation.

Talk to Our Oil & Gas Fabrication Team View Our Projects

Downloads