Oil & Gas Electrical Construction

Reliable Power. Safer Sites. Electrical Systems Built for Oilfield Production.

Oil and gas operations depend on electrical systems that work in difficult field conditions, across distributed assets, and under constant production pressure. When power distribution, motor controls, field wiring, or automation infrastructure fails, the result is downtime, safety risk, lost production, and expensive emergency work.

DSI provides oil and gas electrical construction for well pads, production facilities, tank batteries, saltwater disposals, LACT units, ESP systems, and MCC/VFD installations. Our 100% employee-owned team brings electrical, automation, controls, fabrication, and field execution together under one accountable partner so operators can keep production moving safely and reliably.

Full-scope oilfield electrical construction — installing 4/0 stretch cones

Full-Scope Electrical Construction for Oilfield Operations

One team. One scope. One accountable partner.

Oilfield electrical projects are rarely just “wire and conduit.” Well pads, tank batteries, production facilities, control panels, instrumentation, generators, ESPs, and field devices all have to work together in remote, high-consequence environments.

DSI brings electrical construction, automation, panel shop, fabrication, and field service capabilities together so operators can reduce vendor handoffs and keep projects moving with a team that understands the full production system.

When DSI designs, builds, installs, and supports the electrical infrastructure behind oilfield production, the result is safer execution, better coordination, and systems that are easier to maintain and scale over the life of the asset.

Oilfield electrical panels, instrumentation, and piping at a tank battery facility

The DSI Oilfield Electrical Advantage

Operators choose DSI because we understand the realities of field production, distributed assets, and the cost of downtime. Our crews build electrical systems for the way oilfield operations actually run.

Well pad and production facility electrical construction
Tank battery, SWD, and LACT unit electrical systems
ESP, pump, MCC, VFD, and motor control wiring
Hazardous (classified) location electrical work
Controls and instrumentation support
SCADA-connected field device wiring
Panel shop and fabrication coordination
Generator and backup power coordination
Startup, commissioning, and field service support

The result is electrical infrastructure built for production uptime, field safety, and long-term operability.

Oil & Gas Electrical Construction Capabilities

Well Pad Electrical Systems

DSI builds and supports the electrical systems that bring well pads online and keep them producing, from power distribution to motor controls and field wiring.

Power distribution and service
ESP and pump power wiring
VFD and motor control installation
Field device and sensor wiring
Conduit, cable tray, and terminations
Grounding and bonding
Control panel connections
Startup and commissioning support

Production facility electrical construction

Production Facility & Tank Battery Electrical Construction

Central tank batteries and production facilities tie many systems together. DSI delivers the electrical construction behind reliable, safe, and inspection-ready production sites.

Facility power distribution
MCC and VFD systems
Pump, motor, and mixer wiring
Lighting and area classification
Instrumentation and controls wiring
Tank battery electrical systems
Generator and backup power coordination
Expansions and electrical upgrades

Saltwater disposal and LACT unit electrical systems

Saltwater Disposal & LACT Unit Electrical Systems

SWD facilities and LACT units demand accurate, dependable electrical and control wiring. DSI builds systems that support measurement, transfer, and disposal operations.

SWD facility power and controls
Transfer and injection pump wiring
LACT unit electrical and instrumentation
Flow, pressure, and level device wiring
Motor controls and VFDs
Control panel integration
SCADA and metering connections
Field terminations and commissioning

ESP, Pump, MCC, and VFD Electrical Installation

Electric submersible pumps, motor control centers, and variable frequency drives are central to oilfield production. DSI installs and supports the electrical infrastructure that keeps them running.

ESP power systems and trailers
MCC installation and wiring
VFD installation and configuration support
Pump and motor wiring
Control circuit wiring
Disconnects and starters
Drive modernization and upgrades
Startup and commissioning support

Hazardous Location Electrical Construction

Oil and gas sites include classified, hazardous areas where electrical work has to meet strict requirements. DSI builds electrical systems for these environments with safety and compliance in mind.

Classified-area wiring methods
Explosion-proof and rated enclosures
Sealed conduit systems
Area classification coordination
Rated devices and fittings
Grounding and bonding
Inspection-ready documentation
Field execution in active sites

SCADA, Instrumentation, and Control Wiring

Production visibility depends on accurate signals and connected devices. DSI supports the electrical work behind oilfield automation and SCADA-connected systems.

Instrumentation wiring
Flow, pressure, and level device wiring
PLC and RTU field connections
SCADA panel connections
Communications wiring
Sensor and transmitter wiring
Control panel integration
Troubleshooting and field support

See Our Projects

Field-Proven Across Major Oil and Gas Regions

DSI supports oilfield electrical construction across the country’s most active basins, including the Permian Basin around Midland and Odessa and the Williston Basin and Bakken. With locations close to the field and crews experienced in real production environments, DSI is positioned to respond quickly and execute reliably where operators need it most.

DSI crew in PPE performing field electrical work for oil and gas operators

What Operators Can Expect When Working With DSI

Electrical systems that support production, safety, and long-term operations.

Oilfield electrical work requires practical planning, careful coordination, and systems that can be maintained by field teams long after the project is complete. DSI focuses on electrical infrastructure that supports uptime, safety, and future modernization.

For operators, that means fewer handoffs, clearer accountability, and electrical systems built for the real-world demands of oil and gas production.

Reliable production uptime
Safer electrical infrastructure
Better maintainability in the field
Reduced vendor coordination
Support for automation and SCADA
Practical, field-tested execution
One accountable, employee-owned partner

Frequently Asked Oil & Gas Electrical Questions

What oil and gas electrical construction services does DSI provide?

DSI provides electrical construction for well pads, production facilities, tank batteries, saltwater disposal (SWD) facilities, LACT units, ESP systems, MCCs, VFDs, control panels, instrumentation, SCADA-connected devices, hazardous (classified) locations, and field electrical upgrades.

Does DSI do well pad and production facility electrical work?

Yes. DSI builds and supports well pad and production facility electrical systems including power distribution, ESP and pump wiring, motor controls, VFDs, instrumentation, control panels, and startup support.

Can DSI perform electrical work in hazardous, classified locations?

Yes. DSI builds electrical systems for classified, hazardous areas using rated enclosures and devices, sealed conduit systems, proper area classification coordination, and inspection-ready documentation.

Does DSI install ESP, MCC, and VFD systems?

Yes. DSI installs and supports ESP power systems and trailers, motor control centers, variable frequency drives, pump and motor wiring, starters, disconnects, and drive modernization.

Does DSI support SCADA and instrumentation wiring in the oilfield?

Yes. DSI supports the electrical wiring and field connections behind instrumentation, PLCs, RTUs, SCADA-connected equipment, sensors, flow meters, level and pressure devices, and control panels.

What oil and gas regions does DSI serve?

DSI supports oilfield electrical construction across major basins, including the Permian Basin (Midland and Odessa) and the Williston Basin and Bakken, with locations and crews positioned close to active field operations.

Can DSI work around active production?

Yes. DSI understands that oilfield electrical work often happens while operations continue. Our team supports phased work, coordination, and practical field execution to limit production impact.

What makes DSI different from a typical oilfield electrical contractor?

DSI brings electrical construction, automation, control panels, fabrication, and field service together under one coordinated, 100% employee-owned team. That helps operators reduce handoffs and build systems that are easier to operate and maintain.

Let us build oilfield electrical infrastructure that works

Let’s Build Oilfield Electrical Infrastructure That Works

Your operation depends on electrical systems that keep production running safely and reliably. DSI is ready to design, install, modernize, and support the electrical infrastructure behind your oil and gas operations.

Talk to Our Oil & Gas Electrical Team View Our Projects

Downloads