DSI Midland TX Location
DSI Midland, TX
Texas/New Mexico Operations: UL Panels, Automation Integration & Electrical Services in the Permian Basin Since 2017
DSI’s Midland location serves oil and gas producers, industrial clients, and municipalities across the Permian Basin. UL panel building, automation integration, and electrical services run from one facility built for the pace of West Texas and southeastern New Mexico. See Permian Basin electrical, oil and gas electrical construction, and oilfield automation.
100% employee-owned. More than 25 years in the field.
Mission & Background
The Midland, Texas location of Design Solutions and Integration (DSI) was established in 2017. Our purpose here is to serve oil and gas producers, industrial clients, and municipalities in the fast-moving Permian Basin region.
As a faith-based, 100% employee-owned company with over 25 years of experience, DSI brings innovation, reliability, and a culture of ownership to every project. With operations strategically located across six key sites, our Midland facility adds to our national footprint and local responsiveness in the Permian Basin oil field.
At our Midland, TX location we offer:
- UL panel building and fabrication of control panels and electrical enclosures
- Automation integration including PLC/SCADA systems, field instrumentation, and process control
- Electrical services ranging from heavy industrial wiring to commercial electrical support
Cross-Location Support
At Design Solutions and Integration (DSI), our locations work as one integrated team. Each site has specialized capabilities, from automation engineering and panel fabrication to field service and electrical construction. Our true strength comes from how we share resources and expertise across every location.
Because DSI is 100% employee-owned, every team member takes personal pride in the quality of our work and the satisfaction of our customers. When a project calls for additional support or unique expertise, our teams collaborate across state lines to make sure the job is done right, on time, and to the highest standards of safety and performance.
No matter where our customers are located, they benefit from the full depth of DSI’s experience, capabilities, and commitment.
Midland, Odessa & the Permian Region
Midland, Texas is a dynamic city in the heart of the Permian Basin in West Texas. Midland sits in Midland County and serves as a major hub for oil and gas production, in a basin that ranks among the most productive in the entire United States.
The city is growing steadily, with a 2025 estimated population of about 142,000. Industries in Midland are led by energy but also supported by aerospace, logistics, healthcare, and professional services. For a company that excels in automation, electrical, and fabrication services, Midland, Odessa, and the Permian region offer a powerful setting: an energy-intensive area where industrial integration, control systems, and field services are in high demand.
Services We Offer
Our services work together, not in silos. We start with strong electrical foundations and connect automation, controls, panel builds, fabrication, and field services into one complete system. As a result, projects move faster and deliver better results.
Industrial Electrical Systems
Industrial electrical construction built for real operating environments. DSI installs and supports power systems that connect equipment, controls, panels, instrumentation, and field devices safely and reliably.
Includes:
- Industrial electrical construction
- Power distribution
- MCC and VFD installation
- VFD installation, startup and commissioning (Allen-Bradley PowerFlex)
- VFD programming and troubleshooting
- VFD repair for any brand, in the field or in our shop
- Wellsite electrical construction
- Artificial lift electrical
- Pump and motor wiring
- Control panel installation
- Instrumentation wiring
- Hazardous area electrical installations
- Startup and commissioning support
Automation & Controls Integration
Automation designed around the full system. DSI integrates PLCs, HMIs, SCADA, RTUs, instrumentation, communications, and field devices so equipment communicates clearly and operators have the visibility they need.
Includes:
- PLC programming
- HMI development
- SCADA integration
- RTU and remote site controls
- Instrumentation integration
- Industrial network communications
- System upgrades and modernization
- Troubleshooting and lifecycle support
UL-Certified Panel Shop
DSI’s UL-certified panel shop builds industrial control panels that are engineered, wired, labeled, tested, documented, and ready for field installation.
Includes:
- UL508A industrial control panels
- UL698A hazardous location panels
- PLC control panels
- SCADA interface panels
- Pump control panels
- Variable frequency drive (VFD) panel design and build
- Allen-Bradley PowerFlex VFD panels
- ESP and artificial lift VFD packages
- Regenerative drive packages (PowerFlex 755T)
- Motor control panels
- Repeat-build panel programs
- Factory acceptance testing and documentation
Fabrication
DSI fabrication runs out of its own facility, building the skids, supports, frames, platforms, and mounts that critical systems depend on. Work is fabricated in the shop, then shipped out and installed in the field, coordinated with the electrical, automation, panel shop, and field teams from the start so it fits when it arrives.
Includes:
- Shop fabrication in a dedicated facility
- Equipment skids and support structures
- E-House and power distribution center fabrication
- Covered electrical racks
- Panel and enclosure support frames
- Access platforms, stairs, ladders, and walkways
- Pipe and conduit supports
- Custom weldments, racks, and mounts
- Built to ship and install in the field
- Shop-to-field coordination with the install crew
Field & Facility Services
DSI field teams work on live sites: installation, startup, commissioning, troubleshooting, maintenance, modifications, and long-term system performance. This is also where DSI’s certified welding sits, including ASME National Board R Stamp pressure vessel repair and other welding and fabrication repairs carried out in the field.
Includes:
- Field installation support
- Startup and commissioning
- ASME R Stamp pressure vessel repair
- Field welding and fabrication repairs
- Oil and gas field services
- Troubleshooting and equipment upgrades
- Field modifications
- Long-term system support
- 24/7 emergency support
Equipment We Build for Permian Basin Operators
Built in DSI shops, tested before it ships, and installed by the same team that designed it.
UL 508A Industrial Control Panels
PLC, pump, VFD and SCADA interface panels, wired, labeled, tested and documented in our UL-certified shop.
UL 698A Hazardous Location Panels
Panels for classified areas with gas and vapor exposure, built with approved components and intrinsically safe circuits.
VFD Panels and Drive Packages
Allen-Bradley PowerFlex variable frequency drive panels for pumps, compressors and artificial lift, designed, built, tested, installed and started up by one team.
E-Houses and Power Distribution Centers
Climate-controlled buildings that protect switchgear, drives and controls as one system instead of upgrading every component for outdoor duty. Our Midland team wired the container E-House featured on our E-House page.
ESP Trailer Systems
Trailer-mounted electrical packages for electric submersible pump service that move between wells and power up fast.
Regenerative Drive Packages
Allen-Bradley PowerFlex 755T regen packages that cut heat, vibration and wear on artificial lift, so equipment lasts longer between rebuilds.
Covered Electrical Racks and Skids
Covered racks and skids built to print, so every site installs the same way and field crews stop fixing in the dirt.
Why Customers Rely on Our Midland Team
One team delivering electrical, automation, UL panels, fabrication, and field services means fewer vendor handoffs and fewer gaps for problems to hide in.
- A single point of contact for the full project scope
- Field-proven experience in Permian Basin production environments
- UL-certified panels built and tested within DSI
- PLC, SCADA, and instrumentation integrated with the electrical scope
- Support from every DSI location when a project needs it
- Employee-owners accountable for the finished result
Areas We Serve From Midland
Our Midland crews cover the Permian Basin across West Texas and southeastern New Mexico.
Midland and Odessa
Midland County and Ector County production, gathering and processing sites.
Big Spring and Stanton
Howard and Martin County operators along I-20.
Andrews and Seminole
Northern Permian leases, batteries and compressor stations.
Pecos and Fort Stockton
Delaware Basin wellsites, SWD facilities and midstream.
Crane and McCamey
Southern Permian production and field services.
San Angelo
Industrial and municipal work on the east side of the basin, including wastewater control panels in Texas.
Southeast New Mexico
Lea and Eddy County work, coordinated with our Carlsbad team.
Anywhere DSI Works
Every DSI location backs Midland projects when the scope calls for it.
Design Solutions & Integration (DSI) in Midland, TX
Do not hesitate to contact us with any questions you may have. We will put you in touch with our Midland, TX team and get you the answers you need.
Phone
Office Hours
Monday to Friday, 8:00 AM to 5:00 PM
Saturday and Sunday, closed
Office closed Thanksgiving, Christmas Day and New Year’s Day
24/7 Emergency Field Service
Our field teams respond around the clock, every day of the year, for DSI customers across the Permian Basin.
One Team. Full Scope. Systems That Work Together.
Tell us what you are building, upgrading, or troubleshooting. Our Midland team will help you scope it and put the right people on it.
100% Employee-Owned | 25+ Years in the Field | UL-Certified Panel Shop | ASME R Stamp Welding Certification | 6 Locations | Serving Oil & Gas, Industrial, and Municipal Customers