Permian Basin Oilfield Electrical & Automation Services
Oilfield Electrical & Automation Services in the Permian Basin
Electrical construction, automation integration, and well pad infrastructure solutions for oil & gas operations across the Permian Basin.
With regional operations based in Midland, Texas and Carlsbad, New Mexico, DSI works alongside operators throughout West Texas and southeastern New Mexico to deliver reliable electrical systems, automation solutions, and infrastructure upgrades that keep production moving.
Electrical & Automation Solutions for Permian Basin Oil & Gas Operations
The Permian Basin is one of the most productive oil and gas regions in the world, stretching across West Texas and southeastern New Mexico. The basin’s massive scale, high drilling activity, and distributed well pad infrastructure create unique challenges for electrical power systems, automation, and control integration.
Today’s Permian operations rely heavily on:
- Horizontal drilling
- Hydraulic fracturing
- Multi-well pad development
- High-volume artificial lift systems
These technologies dramatically increase the demand for reliable electrical infrastructure and advanced automation systems that can operate continuously in remote field environments.
For operators, electrical reliability directly impacts production uptime, equipment performance, and long-term operating costs.
That’s where experienced oilfield electrical contractors make the difference.
Electrical Challenges in the Permian Basin
Operating in the Permian Basin presents a set of electrical and automation challenges that require specialized experience and field-proven solutions.
Aging Well Pad Infrastructure
Many producing wells rely on electrical systems installed years ago. Legacy drives, power distribution equipment, and control systems can create inefficiencies and reliability risks as production scales.
Remote Well Pad Locations
Permian well sites are often located miles from existing electrical infrastructure, making power distribution, generator integration, and electrical reliability critical design considerations.
Increasing Automation Requirements
Modern oilfield operations rely on automated systems to monitor production, control pumps, and optimize artificial lift performance across large field networks.
Harsh Environmental Conditions
Permian Basin equipment must withstand extreme operating environments including intense heat, freezing winter storms, corrosive gases, and abrasive production sand. Weather events alone can disrupt production across the basin by causing equipment freezes, power outages, and infrastructure failures if electrical systems are not properly designed and maintained.
Reliable electrical infrastructure is essential to maintaining continuous production across these demanding conditions.
DSI Oilfield Electrical & Automation Services
DSI provides integrated electrical and automation services for oil and gas operations throughout the Permian Basin.
Our team combines industrial electrical construction, automation integration, and control panel fabrication to support operators across the entire lifecycle of their facilities and well pad infrastructure.
Industrial Electrical Construction
Our electrical construction teams install and maintain the power systems that support Permian oilfield operations, including:
- Well pad power distribution
- MCC and motor control installations
- VFD drive systems
- Power infrastructure upgrades
- Facility electrical systems
DSI electricians understand the safety, reliability, and uptime requirements of active oilfield operations.
Automation & Control Systems
Modern oil production depends on automation systems that provide visibility, control, and performance monitoring.
DSI designs and integrates automation systems that help operators:
- Monitor well performance
- Control pumping equipment
- Collect real-time production data
- Improve operational efficiency
Our controls engineers and technicians work with industry-leading automation platforms to create systems that scale with production.
Well Pad Electrical Systems
Well pad infrastructure must deliver consistent, reliable power across multiple wells and production assets.
DSI designs and installs well pad electrical systems including:
- Pad power distribution
- Artificial lift power systems
- Pump motor controls
- Electrical upgrades for existing wells
Our solutions help operators maintain reliable power delivery even in remote production environments.
Control Panel Fabrication
DSI designs and builds custom industrial control panels that support automation and production systems used throughout oilfield operations.
Our panels are engineered for:
- Harsh oilfield environments
- Reliable system integration
- Long-term operational durability
Each panel is fabricated to meet both project specifications and applicable electrical standards.
ESP Electrical Systems
Electric Submersible Pumps (ESP) play a critical role in maintaining production levels across many Permian Basin wells.
DSI provides electrical integration and support for ESP systems including:
- Power distribution infrastructure
- Motor controls and drives
- Electrical equipment integration
- Field installation and commissioning
Reliable ESP electrical systems help operators maintain stable production across high-output wells.
Modernizing Oilfield Electrical Infrastructure
As production expands across the Permian Basin, many operators are upgrading older electrical systems to improve performance, reliability, and efficiency.
Modernization projects often include:
- Drive system upgrades
- Improved automation and monitoring
- Energy efficiency improvements
- Infrastructure upgrades for expanded production
Upgrading legacy electrical systems can reduce downtime, improve power efficiency, and support long-term production growth.
DSI works closely with operators to evaluate existing infrastructure and implement modernization strategies that align with operational goals.
Oil & Gas Services Behind Every Permian Project
Permian work draws on four DSI service groups. Each one has its own oil and gas page with full capabilities, standards, and answers to the questions operators ask most.
Oil & Gas Electrical Construction
Well pads, tank batteries, SWD and LACT units, ESP power, motor control, and classified area installations.
Oil & Gas Automation
PLC and SCADA programming, VFD and ESP control, telemetry, instrumentation, and automation modernization.
Oil & Gas Panel Shop
UL 508A and UL 698A control panels built for Class I Division 2 areas, wellhead boxes, and harsh oilfield service.
Oil & Gas Fabrication
Shop-built electrical racks, skids, supports, and canopies fabricated to move to the field and be installed.
A Partner Built for Oilfield Operations
DSI is a 100% employee-owned company with decades of experience delivering electrical and automation solutions for energy producers across major U.S. oilfields.
Operators choose DSI because we bring:
Oilfield Experience
Our teams understand the realities of field operations, remote sites, and production-driven schedules.
Integrated Capabilities
DSI combines electrical construction, automation integration, and control panel fabrication within one organization.
Skilled Electricians and Controls Technicians
Our craftsmen electricians and automation specialists deliver high-quality work designed for long-term reliability.
Long-Term Partnerships
We work closely with operators to support projects that improve production efficiency and infrastructure performance.
Our goal isn’t just completing projects. It’s building long-term partnerships that help operators succeed.
Serving Oil & Gas Operations Across the Permian Basin
With regional operations based in Midland, Texas and Carlsbad, New Mexico, DSI supports oil and gas operators across the Permian Basin and surrounding West Texas energy corridor.
Our team regularly works with producers operating in:
- Midland, TX
- Odessa, TX
- Pecos, TX
- Mentone, TX
- Big Spring, TX
- Carlsbad, NM
By maintaining a strong presence in the region, DSI is positioned to respond quickly to project needs and ongoing field support.
Where We Work
Permian Basin, Midland/Odessa
Supporting oilfield producers across West Texas and southeastern New Mexico.
Williston Basin, North Dakota & Eastern Montana
Providing electrical services for major operators across the Bakken.
Across the US
Our team travels well and we have teams working in many other areas of the US as projects arise.
DSI is strategically positioned in both regions to deliver fast mobilization and consistent workforce support.
Frequently Asked Electrical and Automation Questions
What does an oilfield electrical contractor do?
An oilfield electrical contractor installs, maintains, and upgrades the electrical infrastructure used in oil and gas production. This includes well pad power systems, motor controls, automation systems, and electrical equipment that supports drilling and production operations.
What electrical systems power oil wells in the Permian Basin?
Permian Basin wells typically rely on electrical systems that power artificial lift equipment such as pumpjacks or electric submersible pumps, along with automation controls that monitor and regulate production performance.
Why is automation important in modern oilfield operations?
Automation systems allow operators to monitor wells remotely, collect real-time production data, and optimize equipment performance across multiple field locations.
What are the biggest electrical challenges in the Permian Basin?
Common challenges include remote well locations, extreme environmental conditions, aging infrastructure, and the need for reliable power systems capable of supporting high-production wells.
Talk With Our Permian Basin Team
If you are planning electrical upgrades, automation integration, or new well pad infrastructure in the Permian Basin, DSI’s experienced electrical and controls teams are ready to help.
Our Midland-based team supports operators across West Texas and southeastern New Mexico with reliable electrical solutions designed for demanding oilfield environments.
Downloads
Permian Basin Oilfield Capability Sheets
Downloadable capability sheets covering what we build for oil and gas operators, the certifications behind it, and where we work.
Oil & Gas ElectricalWell pads, tank batteries, SWD and LACT units, ESP, and classified areas.Download PDF
Oil & Gas AutomationPLC, VFD and ESP control, SCADA, telemetry, and field instrumentation.Download PDF
Oil & Gas Panel ShopUL 508A and UL 698A panels for Class I Division 2 and wellhead service.Download PDF
Oil & Gas FabricationShop-built electrical racks, skids, supports, and canopies for field install.Download PDF
100% Employee-Owned | 25+ Years in the Field | UL-Certified Panel Shop | ASME R Stamp Welding Certification | 6 Locations | Serving Oil & Gas, Industrial, and Municipal Customers